logo image

Practice Questions – TestOut Network Pro Chapter 6.1.10 & 6.2.5

Match each switch management method on the left with its corresponding characteristics on the right. Each method may be used once, more than once, or not at all.
Competes with normal network traffic for bandwidth
In-band management
Uses a dedicated communication channel
Out-of-band management
Must be encrypted to protect communications from sniffing
In-band management
Does not compete with normal network traffic for bandwith
Out-of-band management
Affected by network outages
In-band management
Match each type of switch on the left with its corresponding characteristics on the right. Each switch may be used once, more than once, or not at all.
Commonly sold at retail stores
Unmanaged switch
Provide port security features
Managed switch
Support VLANs
Managed switch
Provide very few configuration options
Unmanaged switch
Can be configured over a network connection
Managed switch
Can be configured over a dedicated communication channel
Managed switch
You are configuring PuTTY to be used to access the CLi of a Cisco switch
Which of the following configuration values would prevent PuTTY from connecting? (Select two)
4600 baud
Flow control = RTS/CTS
Match the Cisco device password type on the left with its function on the right.
Controls the ability to log on through a LAN or WAN interface configured on the device.
VTY
Controls the ability to switch configuration modes
EXEC
Controls the ability to connect to the device using a direct connection
Console
A router is configured with the login, no password condition for console access. Which of the following statements is true about access via a Telnet or SSH session?
Access is denied.
You are configuring a switch so that you can manage it via PuTTY from the same network segment as the switch. On the switch, you enter the following commands:

switch#config terminal
switch(config)#interface vlan 1
switch(config-if)#ip address 192.168.1.10 255.255.255.0

Will this configuration work?

No, the no shutdown command needs to be entered.
Which command would you use on a switch to enable management from a remote network?
ip default-gateway 192.168.10.185
What does the ip address dhcp command allow you to do?
Configures the switch to obtain an IP address from a DHCP server.

Need essay sample on "Practice Questions – TestOut Network Pro Chapter 6.1.10 & 6.2.5"? We will write a custom essay sample specifically for you for only $ 13.90/page

Can’t wait to take that assignment burden offyour shoulders?

Let us know what it is and we will show you how it can be done!
×
Sorry, but copying text is forbidden on this website. If you need this or any other sample, please register

Already on Businessays? Login here

No, thanks. I prefer suffering on my own
Sorry, but copying text is forbidden on this website. If you need this or any other sample register now and get a free access to all papers, carefully proofread and edited by our experts.
Sign in / Sign up
No, thanks. I prefer suffering on my own
Not quite the topic you need?
We would be happy to write it
Join and witness the magic
Service Open At All Times
|
Complete Buyer Protection
|
Plagiarism-Free Writing

Emily from Businessays

Hi there, would you like to get such a paper? How about receiving a customized one? Check it out https://goo.gl/chNgQy

We use cookies to give you the best experience possible. By continuing we’ll assume you’re on board with our cookie policy